Structured Cabling

Flush design, suitable for high density use in most datacomm environments Extended hood prevents latch snagging other cables Perfect solution for rapid termination Transparent, high strength, polycarbonate boot with high gloss finish; gives premium appearance to assembled leads Suitable for cable diameter size: approx. 6.5mm Also suitable for use with standard 8p8c connectors for Category 6 (N.B. Retention legs differ from Category 5e boots) Specifications_?? _?? Material: Polycarbonate UL94-V2 Colour: transparent

These plugs are designed to simplify twisted pair terminations by allowing the wire pairs to be easily inserted through the plug and out of the front. This allows the installer to easily check the wiring order before crimping the connector. Twist is maintained more easily enabling a better performing crimp. Waste is minimised and the plugs are suitable for either stranded or solid wires. _?? Housing allows the cable further inside so that twist is maintained up to less than 3 mm from the contacts. Each plug allows twisted pair wires to be inserted through the body and pulled out of the front to ensure the correct wiring order before crimping By pulling the cores into the plug, twists can easily be maintained up to the contacts, enabling fully rated category performance _?? Contact blades are suitable for stranded or solid wire cores from 24-26 AWG (0.51 - 0.40 mm), with insulation up to 1.0 mm O.D. _?? _?? Suitable for Category 6 twisted pair terminations Perfect solution for rapid termination _?? Suitable for termination of solid or stranded UTP cables with sheath O.D. of 5.0 - 6.0 mm. _??_?? Faults and failures minimised Simple one piece design Less cable scrap and wastage N.B. Must be used with suitable crimp tool (e.g., our code TRCSPDY) Housing material: Polycarbonate UL94V-0 Gold plating: 1.27?m/50?_ѝ 3 prong contact for solid or stranded cores Housing colour: transparent Operating temperature: -10?_C to 60?_C